|
|
|
|
 |
|
|
|
| HOME > Products > Spiral Wound Elements > Tap Water |
 |
|
|
 |
|
 |
|
CSM Tap Water RO elements are ideal for tap water and for treating small quantities of water.
|
 |
|
|
 |
|
| Model |
Flow Rate
(GPD,m3/d) |
Salt Rejection(%) |
Diameter/
Length (inch) |
Test Conditions |
Spec Sheet |
| RE4021-TE |
1,050 (4.0) |
99.5 |
4.0 / 21 |
21" BW Standard |
 |
| RE2540-TE |
800 (3.0) |
99.5 |
2.5 / 40 |
40" BW Standard |
|
| RE2521-TE |
300 (1.1) |
99.5 |
2.5 / 21 |
21" BW Standard |
|
|
|
| 40" BW Standard test conditions: NaCl 2,000 mg/L, Pressure 225 psig, Temperature 25°C, pH 6.5-7.0 Recovery 15% |
21" BW Standard test conditions: NaCl 1,500 mg/L, Pressure 150 psig, Temperature 25°C, pH 6.5-7.0 Recovery 8% |
|
|
|
|
|
| Model |
Flow Rate
(GPD,m3/d) |
Salt Rejection(%) |
Diameter/
Length (inch) |
Test Conditions |
Spec Sheet |
| RE4021-TLF |
1,050 (4.0) |
99.2 |
4.0 / 21 |
21" BW Standard |
|
| RE4021-TL |
1,050 (4.0) |
99.2 |
4.0 / 21 |
21" BW Standard |
|
| RE2540-TL |
850 (3.2) |
99.2 |
2.5 / 40 |
40" BW Standard |
|
| RE2521-TLF |
350 (1.3) |
99.2 |
2.5 / 21 |
21" BW Standard |
|
| RE2521-TL |
300 (1.1) |
99.2 |
2.5 / 21 |
21" BW Standard |
|
|
|
| 40" LP Standard test conditions: NaCl 2,000 mg/L, Pressure 225 psig, Temperature 25°C, pH 6.5-7.0 Recovery 15% |
21" LP Standard test conditions: NaCl 1,500 mg/L, Pressure 150 psig, Temperature 25°C, pH 6.5-7.0 Recovery 8% |
|
|
 |
* These models are tested and certified by NSF to NSF/ANSI standard 61 |
|
|
|
|
